Filtromat – OF5 C
If work on live components is required, a second individual should be present to
switch off the unit if necessary.
1.11 Maintenance,
Servicing and Troubleshooting
Perform the adjustment, maintenance/servicing and inspection work specified
according to schedule.
Secure all operating media against accidental start up.
Disconnect the Filtromat from the power supply and protect the entire system from
being inadvertently switched on when performing maintenance, inspection or repair
work.
Check any screwed fittings which have been removed to see that they have been
properly secured.
After performing maintenance and servicing work, always check the safety features
of the product to see that they function properly.
1.12
Modifications to the Filtromat
Do not make any modifications (design modifications, extensions) to the Filtromat
without the prior consent of the manufacturer.
Design modifications may not be made without HYDAC Filtertechnik GmbH’s
express prior written approval.
Immediately replace any machine components which are not in perfect condition.
Only use original (OEM) spare parts and consumables. When using non-OEM
components it cannot be ensured that they have been designed and manufactured
so as to comply with loading and safety requirements.
1.13
How to behave in an emergency
In the event of an emergency, rotate the main and E-STOP switches 90° to the left
in order to shut down the entire system.
HYDAC Filtertechnik GmbH
en
Page 13
BeWa OF5C 3160333a en
2008-02-06
