11
Air Conditioner Features
Guide for operation- General operation
1. After powered on, press ON/OFF button,
the unit will start to run. (Note: When
it is powered off, the guide louver of main
unit will close automatically.)
2. Press MODE button, select desired
running mode, or press COOL or HEAT
mode to enter into the corresponding
operation directly.
3. Pr or - button, to set the desired
temperature. (It is unnecessary to set the
temp. at AUTO mode.)
4. Pressing FAN button, set fan speed, can
select AUTO, FAN 1, FAN 2, FAN 3 or
FAN 4.
5. Pressing SWING button, to select the
swing.
Guide for operation- Optional operation
1. Press SLEEP button, to set sleep.
2. Press TIMER button, can set the
scheduled timer on or timer off.
Introduction for special function
About AUTO RUN:
When AUTO RUN mode is selected, the
setting temperature will not be displayed on
the LCD, the unit will be in accordance with
the room temperature automatically to select
the suitable running method and to make
ambient comfortable.
About LOCK:
Under switch-on or switch-off state, you
may hold "+" and "-" key simultaneously to
lock and unlock the keypad. When locked,
the display will show the LOCK icon, in
which case the lock icon will flash three
times upon operation of any key. After the
keypad is unlocked, the lock icon on the
display will be hidden. After being
energized, the default is “unlock.”
About switch between Fahrenheit and
Centigrade:
Under switch-off state, you may hold "-"
and "MODE" keys simultaneously to switch
between C and F.
Changing batteries and notices:
1. Slightly to press the place to take out the
back cover of wireless remote control. (As
shown in figure)
2. Take out the old batteries. (As show in
figure)
3. Insert two new AAA1.5V dry batteries,
and pay attention to the polarity. (As show
in figure)
4. Attach the back cover of wireless remote
control. (As show in figure)
NOTE: When changing the batteries, do not
use the old or different batteries; otherwise,
it can cause the malfunction of the wireless
remote control.
