HYBREX IP 37-31 User Manual Download Page 52

Page: 52 / 62

Dual Mode VoIP Keyphone IP37-31

C6.2 FXO Settings

The settings below are relevant to the FXO interface:



FXO Port:

The phone has all of its FXO-related interface parameters
pre-configured for different countries. The settings were
packaged and labeled with the name of the countries. The
user only needs to choose which country the phone is
located.



FXO Silence Timeout: When a FXO turned silence for a period of time, the phone

will automatically hang up the call.



FXO CID Forward On: Activate the FXO CID Forward feature.

Off: Deactivate the FXO CID Forward feature.

The buttons are as follow:



[Submit]: Apply the settings.



[Reset]: Clear all fields.

C6.3 MAC Clone

This is a special feature. Please do not change any setting on this page unless necessary.

Summary of Contents for IP 37-31































































Search results

Summary of Contents for IP 37-31

Reviews:

Related manuals for IP 37-31

Brands by name

Popular brands

HYBREX IP 37-31, User Manual

Search results

Summary of Contents for IP 37-31

Reviews:

Related manuals for IP 37-31

Brands by name

Popular brands