HYBREX IP 37-31 User Manual Download Page 54

Page: 54 / 62

Dual Mode VoIP Keyphone IP37-31

C6.5 Advanced Settings



ICMP Not Echo Yes:

Do not respond to the ICMP messages.

No:

Respond to the ICMP messages.



Send Anonymous CID Yes: Do not send the CID.

No:

Send the CID.



Management from WAN Yes: Allows a remote user to configure the settings of the

phone via the WAN port.

No: Do not allow the settings to be configured via the

WAN port.



IP Dialing Format:

The format of IP dialing.



Send Flash Event:

The method to send a Flash signal.



Encryption Type:

The algorithm used for encryption.



Encryption Key:

The password for encryption.



PPPoE Retry Period:

This value determines the time interval between
each retry cycle when a PPPoE connection is failed.



System Log Server:

The server where the System Log is saved.



System Log Type:

To choose which systems information that is
recorded.

C6.6 Status Log

Enter this page to view the System Log stored on the phone.

C6.7 System Info

Click this item to show the system information page that the user sees upon logging in.

Summary of Contents for IP 37-31































































Search results

Summary of Contents for IP 37-31

Reviews:

Related manuals for IP 37-31

Brands by name

Popular brands

HYBREX IP 37-31, User Manual

Search results

Summary of Contents for IP 37-31

Reviews:

Related manuals for IP 37-31

Brands by name

Popular brands