3.2 | PRE-DELIVERY/ANNUAL/FREQUENT INSPECTION CHECKLIST
SECTION 3 | MAINTENANCE CHECKLISTS
Model:
Serial Number:
• Check each item listed below.
• Use proper operating, service, and maintenance manual for specific information and settings
• If an item is found to be unacceptable make the necessary repairs and check the “repaired” box.
• When all items are “acceptable”, the unit is ready for service.
• If an item is found to be unacceptable, make the necessary repairs and check the “repaired” box. When all
items are “acceptable,” the unit is ready for service.
Y — Yes/Acceptable N — No/Unacceptable R — Repaired N/A — Not equipped with this feature
AERIAL PLATFORMS SHALL BE INSPECTED, SERVICED, AND ADJUSTED TO
MANUFACTURER’S REQUIREMENTS BY A QUALIFIED MECHANIC PRIOR TO
EACH SALE, LEASE, OR RENTAL, AND EVERY 3 MONTHS OR 150 HOURS,
WHICHEVER COMES FIRST, AND ANNUALLY.
CAUTION
Y N
R
N/A
Y
N
R
N/A
Base:
Rails/Extending platform:
Inspect slide tracks for damage
ڧ ڧ ڧ ڧ
Extends freely
ڧ ڧ ڧ ڧ
All frame bolts tight
ڧ ڧ ڧ ڧ
Cables in place/secure
ڧ ڧ ڧ ڧ
Pump Secure
ڧ ڧ ڧ ڧ
Locks in Stowed Position
ڧ ڧ ڧ ڧ
DC motors secure
ڧ ڧ ڧ ڧ
Locks in Extended Position
ڧ ڧ ڧ ڧ
Batteries Fully Charged
ڧ ڧ ڧ ڧ
Functions:
For actuator-steered models:
Tie rods secure
ڧ ڧ ڧ ڧ
All Functions (Srive,Elevate,Steer) Operational
(see Pre-Start Inspection for details)
ڧ ڧ ڧ ڧ
Wheels:
Pothole guards deploy when platform elevated
ڧ ڧ ڧ ڧ
Snap Rings Secure
ڧ ڧ ڧ ڧ
Emergency Stop Breaks Circuits
ڧ ڧ ڧ ڧ
Bolts/Nuts Tight
ڧ ڧ ڧ ڧ
Slow Speed limit switch Set properly
ڧ ڧ ڧ ڧ
All Shields/Guards in place
ڧ ڧ ڧ ڧ
Pothole interlock functions correctly
ڧ ڧ ڧ ڧ
Scissors:
Brakes:
Operational
ڧ ڧ ڧ ڧ
No Broken Welds
ڧ ڧ ڧ ڧ
Emergency Down Operational
ڧ ڧ ڧ ڧ
No Bent Beam Members
ڧ ڧ ڧ ڧ
Wiring:
All rollers Turn Freely
ڧ ڧ ڧ ڧ
Switches secure
ڧ ڧ ڧ ڧ
Ret. Rings Secure On Pivots
ڧ ڧ ڧ ڧ
Contactor(s) secure
ڧ ڧ ڧ ڧ
Maintenance Locks:
Stored in designated location
ڧ ڧ ڧ ڧ
Tight on terminals (No loose wiring)
ڧ ڧ ڧ ڧ
Platform:
Oil:
Level 1” from top (when platform stowed)
ڧ ڧ ڧ ڧ
No Bent rails
ڧ ڧ ڧ ڧ
Check all hose for leaks
ڧ ڧ ڧ ڧ
No Broken welds
ڧ ڧ ڧ ڧ
Check all fittings for leaks
ڧ ڧ ڧ ڧ
All rails in place/secure
ڧ ڧ ڧ ڧ
Battery Charger Secure/Operational
ڧ ڧ ڧ ڧ
110V outlet safe/working (if applicable)
ڧ ڧ ڧ ڧ
Tilt sensor
ڧ ڧ ڧ ڧ
Entrance gate Closes Freely
ڧ ڧ ڧ ڧ
Warning Horn (if applicable)
ڧ ڧ ڧ ڧ
Decals:
Hour meter operational
ڧ ڧ ڧ ڧ
Legibile
ڧ ڧ ڧ ڧ
Battery indication operational
ڧ ڧ ڧ ڧ
Correct capacity noted
ڧ ڧ ڧ ڧ
Operator’s Manual is on the unit
ڧ ڧ ڧ ڧ
Proper placement & quantity
ڧ ڧ ڧ ڧ
If equipped with load sensing:
Overload light & alarm sounds when overloaded
ڧ ڧ ڧ ڧ
Date:
Inspected by:
MAINTENANCE & TROUBLESHOOTING
HB-1230CE
SUPO-717
REV A
16
THIS PAGE WAS INTENTIONALLY LEFT BLANK
MAINTENANCE & TROUBLESHOOTING
HB-1230CE
SUPO-717
REV A
17
