Huvema HU 40 TI, Manual

Page: 13 / 28

13
CHANGES AND T YPING ERRORS RESERVED CHANGES AND T YPING ERRORS RESERVED
4. T
echnical specificaTions
No. Description Measure Unit
1. Maximal drilling diameter 40 mm
2. Distance between axis of spindle – column surface 360 mm
3. Max. distance between spindle nose and work table
surface
600 mm
4. Max. distance between spindle nose and base surface 1200 mm
5. Max. spindle travel 180 mm
6. Max. travel of work table and bracket 560 mm
7. Horizontal swing of table on bracket ± 45 degree
8. Taper of spindle bore 4 Morse
9. Number of spindle speeds 12 steps
10. Range of spindle speeds 42, 62, 85, 125, 170,
250
rpm
340, 510, 690, 1035,
1365, 2050
11. Number of spindle feeds 4 steps
12. Spindle feed range 0.07, 0.05, 0.36, 0.40 mm/rev.
13. Column diameter 160 mm
14. Table working area 410 x 380 mm
15. Base working area 450 x 440 mm
16. Work table and base T-slots 2 x 14, 2 x 18 mm
17. 3-phase, 2-speed AC motor Vermogen 2,2 / 2,8 kW
380 (220, 400, 420)
Voltage
V
960 / 1440
Toerental
18. 3-phase electrical
pump
Vermogen 0,085 kW
380 (220, 400, 420)
V
Voltage
6
l/min
Capaciteit
19. Electromagnetic
clutch
Vermogen 0.024 kW
Voltage 24 V
20. Machine dimensions (LxWxH) 1010 x 580 x 2330 mm
21. Machine weight (gross/nett) 750/680 kg
22. Noise level, max. < 78 dB(A)
5. T
ransporTaTion and insTallaTion
5.1. T
ransporT of The machine
• Handle with care when transporting the machine, Pay close attention to the shipping marks. Don’t lay down
the machine on the wrong side. Avoid impact.
• The machine is fully assembled and packed before shipping to the customer. Please check carefully when
opening the package and make sure no parts are missing.
• When lifting the machine by crane, the center of gravity should be closely watched. For the correct method,
seef figure C. To avoid damaging the machine surface, preferably put soft materials between the rope and
the machine surface.