Huvema 19002, Manual

Page: 15 / 53

14
5. The adjust stroke procedure is
(1) Open the side cover (as photo X)
(2) Set operation mould at MPG mold or JOG mold (Manual mold)
(3) Use Ram JOG Button to turn the front linking rod driving wheel to let the
adjusting screw at door direction.
(4) Loose the Hexagon linking rod clamping nut (as photo X)
(5) Use stroke adjusting driving handle (as photo Y) to turn the linking rod
connecting position , Move the linking rod connecting position outside, the stroke
length will be longer, if move the linking rod connecting position inside, the
stroke length will be shorter, operator can adjust the stroke length according to
keyway length requirement.
(6) After finish stroke adjustment, Tighten the linking rod Hexagon clamping nut.
(7) Close the side cover.
▲
Photo X
◄
Photo Y.