6-2
S
ERVICE
REPLACING FLUORESCENT LAMPS
Fluorescent lamps are furnished with moisture
resistant lamp holders, shields and end caps.
Whenever a fluorescent lamp is replaced, be cer-
tain to reinstall the lamp shields and end caps.
The switch in the canopy operates both the
canopy and the shelf lamps. The rail lamp switch
is located on the rail.
REPLACING LAMP HOLDERS AND
END CAPS
The Impact lamp holder is designed to snap into
the sheet metal of the case. The lamp holder has
a locking ‘nub’ which fits inside the groove of
specially designed end caps.
IMPORTANT!
Always replace lamp holders and end caps with
Hussmann lamp holders and end caps.
Use of non-Hussmann parts may result in poor
electrical contact and short lamp life.
Groove
Nub
Impact
End-Cap
Impact
Lamp Holder
Plastic Shield
End Cap
Fluorescent
Lamp
P/N 0453523
