5-2
M
AINTENANCE
P/N 0453523
CLEANING HONEYCOMB ASSEMBLIES
Honeycombs should be cleaned every six months.
Dirty honeycombs will cause merchandisers to
perform poorly. The honeycombs may be cleaned
with a vacuum cleaner. Soap and water may be
used if all water is removed from the honeycomb
cells before replacing. Be careful not to damage
the honeycombs.
1. Using a flat object such as a screw driver,
compress the honeycomb and remove it
from its retainer.
2. Clean and dry the honeycomb.
3. After cleaning, replace in reverse order.
REMOVING INTERIOR BACK PANELS
The interior back panels may be removed for
cleaning and to gain access to the evaporator
coils. Remove the rear interior back panels as
follows:
1.
D
ISCONNECT THE ELECTRICAL POWER TO THE
MERCHANDISER
.
2. Remove shelving.
3. Remove the lower panel first: lift the panel
up, then pull forward and out.
4. Remove the top panel.
5. Replace panels in reverse order, starting with
the top panel.
6. After cleaning or servicing the merchandiser,
reconnect the electrical power.
CLEANING UNDER MERCHANDISERS
Remove lower front panels. Use a vacuum with a
long wand attachment to remove accumulated
dust and debris from under the merchandiser.
Retainer
Honeycomb
Honeycomb
Retainer
Multi-deck Honeycomb Replacement
Single Deck Honeycomb Replacement
