5-4
m
aIntenanCe
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • WWW.HUSSMANN.COM
P/N 0520677_W
CLEANING CONDENSATE PUMP AND
HEATED EVAPORATION PANS
(for case with field-installed option)
a
lways
Disconnect
power
at
the
main
case
Disconnect
before
servicing
the
equipment
.
These items are optional items and are not
provided with the case.
• The condensate water outlet for the self-
contained models empties into a limited
capacity evaporation pan.
• Clean product spills immediately. If a product
spill enters the Condensate Pump or Heated
Evaporation Pans, a maintenance technician
may be required to clean both the pump and
heated pans.
• Clean case interior with a sponge or soft
cloth, wetted with mild soap and water. Do
not pour water from a bucket or hose into case
drain. Water introduced during cleaning will
cause the evaporation pan to overflow.
• Sediment and debris will clog the Condensate
Pump and plastic tubing for water delivery to
the Heated Evaporation Pans.
• The Condensate Pump and the Heated
Evaporation Pans require regular monthly
inspection. The Condensate Pump is located
below the case bottom. The Heated Evaporation
Pans are located on the case top. Evidence
of excess water or odor is an indication that
immediate service is required.
• Recommended cleaning the Condensate
Pump reservoir and Heated Evaporation Pans
is with mild soap and water. Disconnect power
before cleaning. Empty pump sump and heater
pans of water before reapplying power.
CLEANING UNDER MERCHANDISERS
Remove splashguards not sealed to floor.
Use a vacuum with a long wand attachment
to remove accumulated dust and debris from
under the merchandiser.
REMOVING SCRATCHES FROM BUMPER
Most scratches and dings can be removed
using the following procedure.
1. Use steel wool to smooth out the surface
area of the bumper or top rail.
2. Clean area.
3. Apply vinyl or car wax and polish surface
for a smooth glossy finish.
— LOCK OUT / TAG OUT —
To avoid serious injury or death from electrical
shock, always disconnect the electrical power at
the main disconnect when servicing or replacing
any electrical component. This includes, but is
not limited to, such items as doors, lights, fans,
heaters, and thermostats.
—
Evaporation Pan is Hot!
—
and poses risk of bodily injury — Always wear
gloves and protective eye wear when servicing
condensate pump and heated evaporation
pans. Turn off evaporation pan heater, and
allow pan to cool before servicing.
