Husqvarna Viking Platinum Q 160, User Manual

Page: 47 / 52

Platinum™ Q|160 Quilting Machine User’s Guide
| 43
Damage or burr at needle hole
of throat plate or other thread
handling part
• If thread is shredding at the throat plate, check for burrs or jagged
edges. Gently rub with emery cloth to remove the sharp edge.
Consult a repair technician to polish any hard-to-reach or delicate
areas, or if the burr is inside the throat.
Wrong type of needle • Use only the needles recommended by Husqvarna® Viking®
(134, sizes 12 through 21).
Other possible problems • Needle too close to hook, causing friction and possible collision
of hook point and needle (causing broken thread).
• Nee dle plate damage
• Ho ok damage
• Broken needles or damaged needle bar clamp
Nothing visible on the display Corrective Measure(s)
Display cables unplugged • Locate the black cable that plugs into the touch-screen display.
Turn off machine. Connect the cable to the side of the machine
and to the display. Make sure both ends are plugged in securely.