20
1047356-26
11.Presser foot height and parallelism to the needle
plate
Check
When the presser foot is in its highest lifting position it shall be 6.5 mm above the needle plate and in its
down position the presser foot should be parallel to the feed dog.
Adjustment
1.Put on a presser foot.
2.Lower the feed dog.
3.Set the presser bar in its highest lifting position.
4.Loosen screw (A) for the presser bar from the front.
5.Adjust the height and direction of presser foot.
6.Tighten the screw (A).
7.Lower the presser bar and check position the presser foot so its parallel to the feed dog.
8.If incorrect parallelism. Loosen up the screw (A) and turn presser foot so its parallel to the feed dog.
Settings
6.5 mm
A
Summary of Contents for VIKING Designer Jade 20
Page 3: ...3 1047356 26 ...
Page 7: ...7 1047356 26 ...
