12
1047356-26
3.Timing of the Feeding in relation to the needle
Check
1. Remove all covers.
2. Turn the handwheel toward you until the needle is its lowest point.
At this time, the mark (a - very small molded line on edge) on the lower shaft timing pulley must be facing
toward you.
Adjustment
1. Loosen the screw (b) tightening the tension pulley bracket.
2. Slip out the timing belt from lower shaft timing pulley.
3. Turn the lower shaft timing pulley so that the mark faces toward you.
4. Hook the timing belt on the pulley.
5. Push the tension pulley bracket lightly (350-400g).
6. Retighten the screw (b)
7. Check the Feed timing again.
8. When you have adjusted it, check the timing of the hook again.
Settings
a
b
350-400g
Summary of Contents for VIKING Designer Jade 20
Page 3: ...3 1047356 26 ...
Page 7: ...7 1047356 26 ...