29
1047356-26
20.Adjustment of bobbin winder stop
Check
When winding up the lower thread onto the bobbin the machine should stop when there is a min. of 1 mm
between the edge of the bobbin and the thread.
Adjustment
1. If the bobbin thread is wound too little or too much, loosen the screw (b) near bobbin winder and adjust
as follows.
2. If the bobbin thread is wound too much, loosen the screw (b)
and slide the bobbin winder stop (c) to the left.
3. If the bobbin thread is wound too little, loosen the screw (b)
and slide the bobbin winder stop (c) to the right.
4. Retighten the screw (b).
Settings
b
c
Summary of Contents for VIKING Designer Jade 20
Page 3: ...3 1047356 26 ...
Page 7: ...7 1047356 26 ...
