This household overlock machine is designed to comply with IEC/EN/CSA C22.2 No. 60335-1 & 60335-2-28 and UL1594.
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using this household overlock machine.
When using an electrical appliance, basic safety precautions should always be followed,
including the following:
Keep the instructions at a suitable place close to the machine. Make sure to hand them over if the
machine is given to a third party.
This appliance can be used by children aged from 13 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Cleaning and user maintenance shall not be made by children without supervision. It is not
allowed for children up to and including 13 years to play with the machine. Children up to 13 years
are not allowed to use the machine.
WARNING
–
To reduce the risk of burns, fire, electric shock,
or injury to person:
• A overlock machine should never be left unattended when plugged in. The electrical socket, to
which the machine is plugged in, should be easily accessible. Always unplug this overlock machine
from the electric outlet immediately after using and before cleaning, removing covers, lubricating
or when making any other user servicing adjustments mentioned in the instruction manual.
• Do not allow to be used as a toy. Close attention is necessary when this overlock machine is used
by or near children.
• Use this overlock machine only for its intended use as described in this manual. Use only
attachments recommended by the manufacturer as contained in this manual.
• Never operate this overlock machine if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or dropped into water. Return the overlock machine
to the nearest authorized dealer or service center for examination, repair, electrical or mechanical
adjustment.
• Never operate the overlock machine with any air openings blocked. Keep ventilation openings of
the overlock machine and foot control free from the accumulation of lint, dust, and loose cloth.
•
Keep fingers away from all moving parts. Special care is required around the overlock machine
needle.
• Always use the proper needle plate. The wrong plate can cause the needle to break.
• Do not use bent needles.
•
Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
• Wear safety glasses.
•
Switch the overlock machine off (“0”) when making any adjustment in the needle area, such as
threading needle, changing needle, changing presser foot, etc.
• Never drop or insert any object into any opening.
• Do not use outdoors.
•
Do not operate where aerosol (spray) products are being used or where oxygen is being
administrated.
•
To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.