12 SERVICE WORK ON THE CHASSIS
57
Info
Cover the components to protect them against dam-
age.
Do not kink the cables and lines.
E00418-10
–
Remove O-ring
5
. Remove protective ring
6
.
–
Take out the lower triple clamp with the steering stem.
–
Take out the upper steering head bearing.
12.10
Installing the lower triple clamp
B01632-10
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
the upper steering head bearing.
–
Check whether upper steering head seal
1
is correctly posi-
tioned.
–
Mount protective ring
2
and O-ring
3
.
V00989-10
–
Position the upper triple clamp with the handlebar.
–
Mount screw
4
but do not tighten yet.
–
Mount the clutch line with cable holder
5
.
–
Mount the wiring harness with cable holder
6
.
