Husqvarna TE 150, Owner'S Manual

Page: 58 / 162

12 SERVICE WORK ON THE CHASSIS
56
12.7 Removing the fork protector
V00903-10
–
Remove screws
1
and take off the clamp.
–
Remove screws 2 and take off the left fork protector.
–
Remove screws
3
and take off the right fork protector.
12.8 Installing the fork protector
V00903-11
–
Position the fork protector on the left fork leg. Mount and
tighten screws
1 .
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
–
Position the brake line, wiring harness, and clamp. Mount and
tighten screws
2
.
–
Position the fork protector on the right fork leg. Mount and
tighten screws
3
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
12.9 Removing the lower triple clamp
Preparatory work
–
Remove the headlight mask with the headlight. ( p. 107)
–
Raise the motorcycle with a lift stand. ( p. 53)
–
Remove the front wheel. ( p. 97)
–
Remove the fork legs. ( p. 54)
–
Remove front fender. ( p. 61)
V00988-10
Main work
–
Remove screw
1
.
–
Remove screw
2
.
–
Open cable holder
3
in front of the left radiator and detach
the clutch line.
–
Open cable holder 4 in front of the right radiator and detach
the wiring harness.
–
Remove the upper triple clamp with the handlebar and set
aside.