Husqvarna TE 150, Owner'S Manual

Page: 112 / 162

15 ELECTRICAL SYSTEM
110
The boundary between light and dark must be exactly
on the lower mark for a motorcycle with driver.
» If the light-dark border does not meet specifications:
–
Adjust the headlight range. ( p. 110)
15.9 Adjusting the headlight range
Preparatory work
–
Check the headlight setting. ( p. 109)
V00960-10
Main work
–
Loosen screw
1
.
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on
the lower marking for a motorcycle with rider (instructions
on how to apply the marking: Checking the headlight set-
ting).
Info
If you have a payload, you may have to correct the
headlight range.
–
Tighten screw
1
.
15.10 Changing the combination instrument
Preparatory work
–
Remove the headlight mask with the headlight. ( p. 107)
V00421-10
Main work
–
Remove screws
1
with the washers.
–
Pull the combination instrument upward out of the holder.
V00422-10
–
Using a coin, turn protection cap 2 all the way counter-
clockwise and remove it.
–
Remove combination instrument
3
.
–
Insert the new battery with the label facing outward.
Combination instrument battery (CR 2032) ( p. 146)
–
Check the O-ring of the protection cap for correct seating.