10 SERVICE SCHEDULE
42
Every 10 operating hours when used for motorsports
Every 40 operating hours
Every 20 operating hours
Once after 5 operating hours
Once after 1 operating hour
Check the cables for damage and for routing without kinks.
●
●
●
Check that the throttle cables are undamaged, routed without sharp bends, and set
correctly.
○
●
●
●
Clean the air filter and air filter box.
●
●
●
Change glass fiber yarn filling in the main silencer.
●
●
Service the fork.
●
Service the shock absorber.
●
Check the screws and nuts for tightness.
○
●
●
●
Check the headlight setting. (
○
●
●
●
Check idle.
○
●
●
●
Final check: Check the vehicle for operating safety and take a test ride.
○
○
●
●
●
Make the service entry in the
Husqvarna Motorcycles Dealer.net
and in the Service
and Warranty Booklet.
○
○
●
●
●
○
One-time interval
●
Periodic interval
10.3
Recommended work
Every 40 operating hours when used for motorsports
Every 10 operating hours when used for motorsports
Annually
Every 80 operating hours
Every 40 operating hours
Once after 20 operating hours
Once after 10 operating hours
Change the front brake fluid.
●
Change the rear brake fluid.
●
Change the hydraulic clutch fluid.
●
Grease the steering head bearing.
●
Service the fork.
○
Service the shock absorber.
○
Check the starter drive.
(TE 150 US)
●
●
●
●
Check/adjust the carburetor components.
●
●
●
Change the piston and check the cylinder.
(TX 125 EU)
●
●
●
●
Change the piston and check the cylinder.
(TE 150 US)
●
●
Perform minor engine service. (Check the reed valve housing, reed valve, and
intake flange. Check the exhaust control for functioning and smooth opera-
tion. Check the clutch.)
●
●
●
●
Perform major engine service including removing and installing the engine.
(Change the connecting rod, conrod bearing, and crank pin. Check the trans-
mission and shift mechanism. Change all engine bearings.)
●
●
○
One-time interval
●
Periodic interval
