E.10
TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA
H10010
3
TE-TXC
H10009
2
2
H10008
3
2
TC
GENERAL PROCEDURES
Workshop Manual Ed. 12-2011
- Remove the saddle as described in the relevant paragraph.
- Remove the left-hand side panel as described in the relevant paragraph.
- Using an 8 mm T-wrench on the outside and a 10 mm T-wrench on the inside,
remove the silencer (4) retaining screw (1).
- Remove the spring (2) and the screw (3) using an 8 mm T-wrench; slide out
the silencer (4).
- Disconnect the Lambda sensor connector (7) and shear the wiring clips (TE-
TXC).
