E.5
TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA
H00633
2
1
H10003
1
H10004
2
3
H10005
6
4
5
GENERAL PROCEDURES
Workshop Manual Ed. 12-2011
Rear chassis with mudguard and air box removal (TC)
- Remove the saddle as described in the relevant paragraph.
- Remove the side panels as described in the relevant paragraph.
- Lift the tank at the rear end.
- Disconnect the air temperature sensor (1).
- Remove the exhaust silencer as described in the relevant paragraph.
- Slacken clamp (2) that secures the rubber coupling of the air box (3) to the
throttle body.
- Remove the upper fixing (4) and lower fixings (5) on both sides of the rear
chassis using a 10 mm ring wrench.
- Pull the rear chassis (6) rearwards together with mudguard and air box, and
detach it from the main chassis.
Rear chassis with mudguard and air box removal (TE-TXC)
- Remove the following parts in the order given: saddle, side panels, fuel tank,
silencer and battery (see relevant paragraphs for instructions).
- Shear the plastic clips securing wiring to rear chassis.
- Disconnect the connector (1) of the turning indicator relay (2) (TE).
- Remove the solenoid starter (3) from its mount.
