Husqvarna Soff-Cut 150 E, Operator'S Manual

Page: 14 / 76

performance of the dust extractor can change over
time.
To connect a dust extractor to the
product
1. Turn the wing nut on the plug counterclockwise.
2. Remove the plug from the pipe on the blade block
cover.
3. Connect a dust extractor to the blade block.
Note: If the dust extractor is not compatible with the
connection on the product, use an adapter.
To connect the product
WARNING: Make sure that the electrical
supply align with the data on the rating plate.
WARNING: Make sure that the mains socket
is correctly grounded before you connect the
product. Refer to Grounded product
instructions on page 6
.
1. Connect the product to a recommended extension
cable. Refer to
Recommended cable dimensions on
page 24 .
2. Connect the extension cable to a correctly grounded
outlet. Refer to
Grounded product instructions on
page 6
.
To start the motor
• Push the lock button (A) and pull the power switch
(B) up.
A
B
To operate the product
CAUTION: Make sure that no objects hit the
blade block. It can cause damage to the
product.
1. Start the motor. Refer to
To start the motor on page
14 .
2. Align the front pointer (A) and the rear pointer (B)
with the line where you will do the cut.
A
B
3. Push the handle down and pull the blade release
lever to slowly lower the blade into the concrete.
14 1038 - 002 - 17.10.2019