Maintenance
Introduction
WARNING: Read and understand the safety
chapter before you do maintenance on the
product.
WARNING: To prevent injury, disconnect the
power cord before you do maintenance.
Maintenance schedule
The maintenance intervals are calculated from daily use
of the product. The intervals change if the product is not
used daily.
Maintenance
Daily
Weekly (40 h)
Do a general inspection
X
Clean the blade and the blade block guard
(every use)
X
Clean the product
X
Examine the controls
X
Examine the skid plate
X
Examine safety devices. Refer to
vices on the product on page 7
X
Examine the wheels
X
Examine the blade
X
Examine the drive belt
X
Lubricate the blade shaft bearings
X
Examine the power cord for damage
X
To do a general inspection
• Make sure that all nuts and screws on the product
are tightened correctly.
To clean the product externally
CAUTION: Always clean the product
immediately after use, before the concrete
becomes dry. Remaining concrete can
cause damage to the product.
page 10
.
2. Clean the product with water.
CAUTION: Do not point the water
directly at the motor, especially if you
use a high-pressure washer.
3. Make sure that the handles and levers are clean and
dry before you operate the product.
16
1038 - 002 - 17.10.2019
