1. Turn the power switch (10) to the OFF position to
stop the machine.
10
To cut with throttle (MS 610 G)
1. Let the engine warm up for several minutes with
engine throttle at idle speed (minimum).
2. Open the engine throttle full open.
3. Start sawing, all sawing is done at full throttle.
To cut with the cutting arm handle
1. Hold the handle and lower the blade to cut the work
piece.
2. Release the force from the handle to stop the
cutting.
To cut with plunge cutting (MS 610 G)
The cutting arm is spring loaded and adjustable up and
down.
271 - 002 - 12.06.2018
17
Summary of Contents for MS 610
Page 3: ...Product overview MS 610 G 271 002 12 06 2018 3 ...
Page 25: ...Présentation du produit MS 610 G 271 002 12 06 2018 25 ...
Page 49: ...Descripción general MS 610 G 271 002 12 06 2018 49 ...
Page 72: ...Original instructions Instructions d origine Instrucciones originales 1158948 49 2018 06 25 ...
