Husqvarna FS 6600D, Operator'S Manual

Page: 37 / 104

37
FS8400 DIESEL SPECIFICATIONS
Standard & CE Models
FS8400 Diesel Model FS8400
20”
FS8400
26”
FS8400
30”
FS8400
36”
FS8400
42”
FS8400
48”
FS8400
60”
FS8400 Diesel Model CE FS8400
450mm FS8400
600mm
FS8400
750mm
FS8400
900mm
FS8400
1050mm
FS84
1200mm
FS8400
1500mm
ALL SAWS FEATURE:
Blade Guard Capacity - in. (mm)
18 (457) 26 (660) 30 (762) 36 (914) 42 (1,067) 48 (1,219) 60 (1,524)
Max. Depth of Cut - in. (mm) 6.50 (165) 10.50 (267) 12.50 (318) 15 (381) 17.50 (508) 20.50 (508) 25 (635)
Blade Shaft RPM 2,400 1,800 1,600 1,350 1,180 1,080 815
Approximate Blade Shaft HP 72 Horsepower
Arbor Size – in. (mm) 1" (25.4) with single drive pin up to 48” blade; 1” (25.4) with 6 bolt BHP on 60” blade
Quick Disconnect Blade Flange
Diameter – in. (mm) 5
(127)
5
(127)
5
(127)
6
(152)
7
(178)
8
(205)
10
(254)
Blade Shaft Diameter - in. (mm) 2" (51)
Blade Shaft Bearings Cast Sealed blade shaft with 4 maintenance-free ball bearings
Blade Shaft Drive Dual 10-groove banded 3VX V-belts (20 grooves total)
Blade Coolant Zinc plated dual multiple-jet water spray tubes
Blade Guard Attachment Slip-on through 36"; Bolt-on for 42” – 60”, auto-latch
Blade Control Electro-hydraulic pump raises blade; switch controlled raise/lower on speed control handle; switch controlled positive depth
stop; dial type cutting depth indicator; blade drive disengagement system (clutch); quick disconnect blade flanges
Axle Front 1.25" (31.75 mm) diameter
Rear Easy Adjust Center Pivot w/2 Hydraulic Powered Wheel Motors
Wheels Front 8” x 3" x 1" (203mm x 76mm x 25.4mm) Thick polyurethane tread; sealed ball bearing requiring less maintenance
Rear 10" x 3" x 1.25" (254mm x 76mm x 32mm) Solid rubber, Quick disconnect
Transmission Hydrostatic Pump, w/2 Hydraulic Wheel Motors connected with hoses, neutral start switch, single handle speed control,
Hydraulic bypass valve for pushing.
Max. Ground Speed Infinitely variable: 0 – 300 FPM forward & reverse. (25 M/min maximum Reverse Speed on CE models)
Chassis Heavy-duty, rigid, box and channel section construction
Weight – lb. (Kg) – Uncrated 1,890 (858) 1,910 (867) 1,930 (876) 1,960 (890) 1,990 (903) 2,050 (930) 2,300 (1044)
POWER SOURCE:
Engine
John Deere Turbocharged Charge Air Cooled Electronic Diesel
Specifications 5030HF285 EPA Tier 3 Euro Stage 3A Compliant
Max. Horsepower 82
.5
@ 2,800 RPM DIN. (61.5 kW)
Displacement cu. in. (l) 183 cu. in. (3 liter)
Bore / Stroke– in. (mm) 3.39 (86) / 4.13 (105)
Cylinders / Stroke 5 / 4
Fuel Capacity – gal. (l.) 9.75 (37)
Oil Capacity – qt. (l) 11.8 (11.2) with filter OR 10.9 (10.6) without filter
Air Filter Radial Seal with pre-cleaner and restriction indicator
Starter Electric
Engine Coolant 50/50 Water / Ethyl Glycol Mix
SAW DIMENSIONS w/ 36” guard:
*Add about 8” (200mm) to Length for 60” (1500mm)
s e h c n I . l e d o m
Metric
mm
A Saw Width 37-3/8 949
B Center to Center Wheel Width (track) – FRONT 24-5/8 625
Center to Center Wheel Width (track) – REAR 25-1/4 642
C Outside to Outside Wheel Width - FRONT 27-1/4 692
Outside to Outside Wheel Width - REAR 28-3/8 699
9 4 7 2 / 1 - 9 2 h t d i W e m a r F D
E
Inner Flange to Inner Flange Width 32-1/2 826
4 2 7 2 / 1 - 8 2 n o i s n e t x E e l d n a H F
G Min. Saw *Length (handles in, pointer & guard
up) 71-1/2 1,816
H Saw *Length (pointer down, handles out) 141-1/2 3,594
I Maximum Overall Height (pointer up) 53 1,346
Max Overall Height (top of pre-cleaner, pointer
down) 64-1/2 1,632
K Min. Overall Height (no muffler, rotate pre-
cleaner) 49-1/2 1,255
L Wheel Base Length 27-3/4 705
M Guard to Handle Length (handles in) 75 1,905
N Maximum Overall *Length (handles in) 106 1/2 2,705
O Maximum Overall *Length (handles extended) 129 3,276