Husqvarna FC 350 2023, Owner'S Manual

Page: 38 / 158

9 SERVICE SCHEDULE
36
every 24 months
Every 90 operating hours
Every 45 operating hours
Every 15 operating hours
After 1 operating hour
Check the wheel hubs.
● ● ●
Check the rim run-out.
○ ● ● ●
Check the spoke tension. ( p. 103)
○ ● ● ●
Check the chain, rear sprocket, engine sprocket, and chain guide. ( p. 79)
○ ● ● ●
Check the chain tension. ( p. 77)
○ ● ● ● ●
Grease all moving parts (e.g., hand lever, chain,...) and check for smooth operation.
○ ● ● ● ●
Change the spark plug and spark plug connector.
● ●
Check the valve clearance.
○ ● ●
Change the fuel filter.
● ●
Check the clutch.
● ● ●
Clean the air filter and air filter box. ( p. 69)
● ● ● ●
Change the glass fiber yarn filling of the main silencer. ( p. 72)
● ●
Service the fork.
● ●
Perform the shock absorber service.
● ●
Check all screws, nuts, and hose clips for a tight fit.
○ ● ● ● ●
Change the fuel screen. ( p. 120)
○ ● ● ● ●
Check the fuel pressure.
○ ● ● ●
Check the antifreeze and coolant level. ( p. 110)
● ●
Check the coolant level. ( p. 111)
○ ●
Change the coolant. ( p. 113)
●
Check the steering head bearing play. ( p. 59)
○ ● ● ●
Lubricate the steering head bearing. ( p. 60)
● ●
Perform minor engine service including removing and installing the engine. (Change
the piston, check/measure the cylinder. Check the cylinder head. Check the camshafts
and valve train system components. Check the timing assembly. Change the radial
shaft seal rings and water pump gasket. Change the intake flange.)
● ●
Perform major engine service, engine is removed. (Change valves, valve springs, valve
spring seats, and valve spring retainer. Change the connecting rod, conrod bearing
and crank pin. Check the transmission and the shift mechanism. Check the oil pres-
sure control valve. Change the suction pump. Check the force pump and lubrication
system. Change the timing chain. Change all engine bearings and all gaskets. Change
the freewheel.)
●
Final check: check vehicle for operating safety.
○ ● ● ● ●
Take a test ride.
○ ● ● ● ●
Read out the fault memory after the test ride using the Husqvarna Motorcycles diag-
nostics tool.
○ ● ● ● ●
Make a service entry in Husqvarna Motorcycles Dealer.net .
○ ● ● ● ●
○
One-time interval
●
Periodic interval