Husqvarna FC 350 2023, Owner'S Manual

Page: 75 / 158

SERVICE WORK ON THE CHASSIS 11
73
F03637-10
Main work
–
Remove the screws
1
on the main silencer.
–
Take off silencer cap
2
and O-ring
3
.
–
Pull glass fiber yarn filling
4
out of the silencer cap.
–
Pull glass fiber yarn filling
5
from the inner tube.
–
Clean the parts that need to be reinstalled and check for
damage.
–
Mount new glass fiber yarn filling
5
on the inner tube.
–
Position new glass fiber yarn filling
4
in the silencer cap.
–
Insert O-ring and silencer cap into outer tube
6
.
–
Mount and tighten screws
1
.
Guideline
Screws on main
silencer
M5 7 Nm (5.2 lbf ft)
Finishing work
–
Install the main silencer. ( p. 72)
11.35 Removing the fuel tank
Danger
Fire hazard
Fuel is highly flammable.
The fuel in the fuel tank expands when warm and can escape if overfilled.
–
Do not fuel the vehicle in the vicinity of open flames or lit cigarettes.
–
Switch off the engine for refueling.
–
Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
–
If any fuel is spilled, wipe it off immediately.
–
Observe the specifications for refueling.
Warning
Danger of poisoning Fuel is harmful to health.
–
Avoid skin, eye and clothing contact with fuel.
–
Immediately consult a doctor if you swallow fuel.
–
Do not inhale fuel vapors.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.
–
Change your clothing if fuel spills on them.
–
Keep fuels correctly in a suitable canister, and out of the reach of children.
Preparatory work
–
Remove the seat. ( p. 65)
–
Remove the right side panel. ( p. 71)