104 72 72-26
23
Clearance between feed dog and the needle plate – Front to Back
Check
1. Set pattern selector dial to "A". Turn stitch length dial to "4".
2. Turn hand wheel to move feed-dog forward and backward.
3. The feed dogs shall not at any point touch the needle plate in the back side or the front side.
Adjustment
1. Remove the base cover.
2. Loosen screw (a) of feed rock crank.
3. Moving feed-dog forward / backward until it is centered in the needle plate.
4. Tighten screw (a) after adjustment.
5. Attach covers.
Summary of Contents for E10
Page 1: ...Service Manual 104 72 72 26 Made in Sweden 11 Aug 2010 ...
Page 31: ...104 72 72 26 31 ...
Page 32: ...32 104 72 72 26 ...
