14
104 72 72-26
The centre position of the needle in straight stitching
Check
1. Set pattern selector dial to straight "A".
2. Insert a new #90 needle.
3. The point of needle (C) shall pass through the centre of the needle hole (D) in the needle plate.
Adjustment
1. Set pattern selector dial to straight “A”.
2. Remove plate (A).
3. Loosen screw (a) than adjust screw nut (b).
Clockwise = needle moves right
Counter-clockwise = needle moves left
4. Make sure needle drops on middle of needle hole.
5. Tighten screw (a) and attach plate (A).
NOTE! This adjustment affect ”Buttonhole - the columns, cutting space” adjustment.
(D)
(C)
Summary of Contents for E10
Page 1: ...Service Manual 104 72 72 26 Made in Sweden 11 Aug 2010 ...
Page 31: ...104 72 72 26 31 ...
Page 32: ...32 104 72 72 26 ...
