Husqvarna Automower 305 Technical Manual Download Page 20

Page: 20 / 94

English - 18

2.3 Ascertain the PIN code

If you forget the PIN code for the robotic lawnmower

or when a mower is blocked because an incorrect

code has been entered, you can find out the right

code. In the input mode for PIN code, or when the

main menu is displayed: Hold down the

key for

five seconds, a combination of twelve letters and the

mower’s serial number will then be displayed.
If the mower is locked for a while due to an

incorrectly entered PIN code, you have to wait

before making another attempt before the letter

combination can be read.
The letter combination can be different in different

attempts on the same mower with the same PIN

code.

Contact the national service organisation and state

the letter combination and serial number. They can

then identify the right PIN code.
For GARDENA R40Li and R70Li, customers must

also be able to provide the right PRK (Product

Registration Key) to obtain the PIN code. The PRK

can be found on the product registration sheet that

comes in the box with the lawnmower. The PRK

is unique to each mower and is linked with the

mower’s serial number. The aim with the PRK is that

customers can demonstrate that they are the rightful

owner of the product.
Press

Arrow back

to exit the function.

2.4 Tools menu

In addition to the main menu selections which are

described in the Operator’s Manual, there is a

further one called

Tools

. The

Tools

menu includes

the possibility of testing a mower’s components and

information about different operating data.
To display the

Tools

menu:

1. Go to the main menu.
2. Press and simultaneously hold down the

and

keys for two seconds.

The text

Expert mode

will be displayed for

one second. A fifth main menu selection then

becomes available, illustrated with an icon in

the form of a cogwheel.

To hide the

Tools

menu:

1. Go to the main menu.
2. Press and simultaneously hold down the

and

keys.

The text

Standard mode

will be displayed for

one second and then disappear. The main

menu will subsequently only contain the four

standard options.

The

Tools

menu will also disappear the next time the

main switch is turned off and on.

2. SPECIAL MENU FUNCTIONS

Make sure to hide Tools before the

mower is returned to the customer.

SECURITY CODE:

ABCD EFGH IJKL

S/N: 000000001

IMPORTANT INFORMATION

3020-009

3020-010

Summary of Contents for Automower 305






























































































Search results

Summary of Contents for Automower 305

Reviews:

Husqvarna Automower 305, Technical Manual, Page: 20 / 94

Search results

Summary of Contents for Automower 305

Reviews: