oPeRatIon
29
When the engine starts, immediately release the
10.
ignition key back to the run position.
Push the choke control in gradually when the
11.
engine has started.
Set the desired engine speed with the throttle.
12.
Allow the engine to run at a moderate speed,
“half throttle”, for 3-5 minutes before loading it too
heavily. USE FULL THROTTLE WHEN MOWING
(no choke).
8065-098
Fuel tank valve OPEN
Move the throttle to the middle position.
6.
If the engine is cold, the choke control should be
7.
pulled fully up.
8065-089
Set the throttle and choke
Open the fuel tank valve for the selected tank.
8.
Press in and turn the ignition key to the start
9.
position.
IMPORTANT INFORMATION
Do not run the starter for more than 5 seconds
each time. If the engine does not start, wait
about 10 seconds before retrying.
WARNING!
Engine exhaust and certain vehicle
components contain or emit
chemicals considered to cause
cancer, birth defects or other
reproductive system damage. The
engine exhaust contains carbon
monoxide, which is an odorless,
colorless, poisonous gas. Do not use
the machine in enclosed spaces.
Summary of Contents for 966613301
Page 52: ...TIMER SCHEMATIC WIRING DIAGRAM 52 ...
Page 66: ...SERVICE JOURNAL Action Date mtr reading stamp sign 66 ...
Page 67: ......
Page 68: ......