Husqvarna 525 LX, Operator'S Manual

Page: 18 / 32

Transportation and storage
• Store and transport the product and fuel so that
there is no risk that any leakage or fumes comes in
contact with sparks or open flames, for example,
from electrical machinery, electric motors, electrical
relays/switches or boilers.
• When you store and transport fuel always use
approved containers intended for this purpose.
• When you store the product for long periods the fuel
tank must be emptied. Contact your local petrol
station to find out where to dispose excess fuel.
Drain the tank into the appropriate containers and in
a well ventilated area.
• Ensure that the product is cleaned and that a
complete service is carried out before long-term
storage.
• The transport guard must always be fitted to the
cutting attachment when the product is transported
or in storage.
• Secure the product during transport.
• In order to prevent unintentional start of the engine,
the spark plug cap must always be removed during
long-term storage if the product is not under close
supervision and when you perform all service
measures.
• Allow the product to cool before you put in i storage.
Technical data
Technical data
525LX
Engine
Cylinder displacement, cm
3
25.4
Cylinder bore, mm 34
Stroke, mm 28
Idle speed, rpm 3000
Recommended max. speed, rpm 9500
Speed of output shaft, rpm 6500
Max. engine output, according to ISO 8893, kW/hp @ rpm 1.0 @ 8500
Catalytic converter muffler Yes
Speed-regulated ignition system Yes
Ignition system
Manufacturer/type of ignition system IKEDA/UK
Spark plug NGK BPMR8Y
Electrode gap, mm 0.65
Fuel and lubrication system
Manufacturer/type of carburettor Walbro WTEA-8C
Fuel tank capacity, litre/cm
3
0.51/510
Weight
Without fuel, cutting attachment and guard, kg 4.5
18 1003 - 001 - 07.01.2019