Husqvarna 2005 CR 125, Owner'S Manual

Page: 32 / 306

32
TELAIO
Tipo..................................monotrave in tubi a
sezione circolare, in acciaio;
telaietto posteriore in lega leggera
SOSPENSIONE ANTERIORE
Tipo .. forcella teleidraulica a steli rovesciati e
perno avanzato (regolabile in compressione ed
estensione); steli
∅
45 mm
Corsa sull'asse gambe .....................300 mm
SOSPENSIONE POSTERIORE
Tipo ..............................................progressiva
con monoammortizzatore idraulico
Corsa ruota........................................320 mm
FRENO ANTERIORE
Tipo ..........................a disco fisso
∅
260 mm
con comando idraulico e
pinza flottante
FRENO POSTERIORE
Tipo.....................a disco flottante
∅
220 mm
con comando idraulico e
pinza flottante
CERCHI
Anteriore ........................ TAKASAGO "Excel"
in lega leggera 1,6"x21"
Posteriore........................TAKASAGO "Excel"
in lega leggera 2,15"x18" (WR 125) e
2,15"x19" (CR 125)
FRAME
Type ...................................Single-beam with
circular steel tubes; light alloy rear frame
FRONT SUSPENSION
Type ..“Upside Down” forkrod telehydraulic
fork with advanced pin (adjustable in
compression and rebound shoke);
forkrods Ø 1.77 in. dia.
Legs axis stroke ................................. 11.8 in.
REAR SUSPENSION
Type .............................................progressive
with hydraulic single shock absorber
Wheel stroke .......................................12.6 in.
FRONT BRAKE
Type.......................floating disc 10.24 in. dia.
with hydraulic control;
floating caliper
REAR BRAKE
Type.................floating disc 8.66 in. dia. with
hydraulic control;
floating caliper
RIMS
Front...............................TAKASAGO "Excel"
in light alloy. Size: 1,6"x21"
Rear................................TAKASAGO "Excel"
in light alloy. Size: 2,15"x18" (WR 125) and
2,15"x19" (CR 125)
CADRE
Type ...................Mono-axe avec tubulures à
section circulaire, en acier;
cadre arrière en alliage leger
SUSPENSION AVANT
Type ........ à fourche téléhydraulique à tiges
renversées et goujon avancé (reglable en
compression et extension);
tiges Ø 45 mm.
Levée sur l'axe jambes......................300 mm
SUSPENSIONE ARRIERE
Type..............................................progressive
avec monoamortisseur hydraulique
Levée roue.........................................320 mm
FREIN AVANT
Type............à disque flottant
∅
260 mm avec
commande hydraulique;
étrier flottant
FREIN ARRIERE
Type............à disque flottant
∅
220 mm avec
commande hydraulique;
étrier flottant
JANTES
Avant...............................TAKASAGO "Excel"
en alliage léger 1,6"x21"
Arrière .............................TAKASAGO "Excel"
en alliage léger 2,15"x18"(WR 125) et
2,15"x19" (CR 125)
1-WR CR 125 -2005 19-05-2004 15:27 Pagina 32