P
rogram
5:5
TO RE-LOAD A STITCH PROGRAM
Once you have finished making your program and touch
OK, it will be loaded to Sewing Mode and is ready to be
sewn. If selecting another stitch in Sewing Mode and then re-
opening the Program mode, your stitch program will remain
unchanged. Every time Program mode is closed, the stitch
program will be loaded to Sewing Mode.
You can also load a previously saved program from the
U-menu and make changes to the programmed stitch in
Program mode.
Note: If the machine is turned off the program disappears from the
Program Mode. Remember to save your program before turning the
machine off.
PROGRAM POP-UP MESSAGES
Not a Programmable Stitch
Some stitches are not possible to insert in a stitch program,
for example buttonholes.
Stitch Program Out of Range
The stitch you are trying to add will make the stitch program
too long.
Your stitch program cannot exceed 500mm (20") long or
contain more than 99 stitches. If the stitch program exceeds
the maximum length or amount of stitches, this pop-up
message will let you know.
