16
TUNING THE ENGINE
96
B00496-10
Main work
–
Remove screws
1
.
0
0
0
4
4
0
0
3
3
0
0
5
5
0
0
2
2
B00056-11
–
Take cap
2
, adjusting spring
3
, auxiliary spring
4
, and spring insert
5
out of the
clutch cover.
–
Pull both springs off of the spring insert.
B00058-10
–
Mount the required auxiliary spring
4
and adjusting spring
3
and slide them into
the clutch cover together.
Auxiliary spring with yellow marking (54637072300)
Auxiliary spring with green marking (54837072100)
Auxiliary spring with red marking (54837072000)
The cut-out of spring insert
5
engages in the angle lever.
Info
Screw
6
must not be turned as this would worsen the engine characteristic.
–
Check the O-ring in the cap.
–
Position the cap.
–
Mount and tighten the screws.
Guideline
Screw, exhaust control cover
M5
6 Nm (4.4 lbf ft)
Summary of Contents for 2013 TE 125 EU
Page 2: ......
