7
PREPARING FOR USE
28
7.4
Preparing for rides on dry sand
600872-10
–
Check the radiator cap.
Value on radiator cap
1.8 bar (26 psi)
» If the displayed value does not equal the setpoint value:
Warning
Danger of scalding
During motorcycle operation, the coolant gets
very hot and is under pressure.
–
Do not remove the radiator cap, radiator hoses or other cooling
system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse
immediately with lukewarm water.
–
Change the radiator cap.
600869-01
–
Fit a dust cover on the air filter.
Dust cover for air filter (59006019000)
Info
See the
HUSABERG Pure Tech
fitting instructions.
600871-01
–
Fit a sand cover on the air filter.
Sand cover for air filter (59006022000)
Info
See the
HUSABERG Pure Tech
fitting instructions.
–
Adjust the carburetor jetting and setting.
Info
The recommended carburetor tuning is available from your authorized HUS-
ABERG workshop.
600868-01
–
Clean the chain.
Chain cleaner (
–
Mount the steel sprocket.
Tip
Do not grease the chain.
–
Clean the radiator fins.
–
Straighten bent radiator fins carefully.
–
If used in sand regularly, replace the piston every 10 operating hours.
7.5
Preparing for rides on wet sand
600872-10
–
Check the radiator cap.
Value on radiator cap
1.8 bar (26 psi)
» If the displayed value does not equal the setpoint value:
Warning
Danger of scalding
During motorcycle operation, the coolant gets
very hot and is under pressure.
–
Do not remove the radiator cap, radiator hoses or other cooling
system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse
immediately with lukewarm water.
Summary of Contents for 2013 TE 125 EU
Page 2: ......
