HUSABERG 2013 TE 125 EU, Owner'S Manual

Page: 54 / 129

11 SERVICE WORK ON THE CHASSIS
52
602509-10
Main work
(TE 125)
–
Remove screw
1
and lower the rear wheel with the swing arm as far as possible
without blocking the rear wheel. Fix the rear wheel in this position.
–
Remove screw
2
, push splash protector
3
to the side, and remove the shock
absorber.
602508-10
(TE 250/300)
–
Remove screw
1
and lower the rear wheel with the swing arm as far as possible
without blocking the rear wheel. Fix the rear wheel in this position.
–
Remove screw
2
, push splash protector
3
to the side, and remove the shock
absorber.
11.19 Installing the shock absorber
x
602509-11
Main work
(TE 125)
–
Push splash protector
1
to the side and position the shock absorber. Mount
and tighten screw
2
.
Guideline
Screw, top shock
absorber M12 80 Nm
(59 lbf ft) Loctite ® 2701
–
Mount and tighten screw
3
.
Guideline
Screw, bottom shock
absorber M12 80 Nm
(59 lbf ft) Loctite ® 2701
Info
The heim joint for the shock absorber at the swing arm is Teflon coated.
It must not be greased with grease or with other lubricants. Lubricants
dissolve the Teflon coating, thereby drastically reducing the service life.
602508-11
(TE 250/300)
–
Push splash protector
1
to the side and position the shock absorber. Mount
and tighten screw
2
.
Guideline
Screw, top shock
absorber M12 80 Nm
(59 lbf ft) Loctite ® 2701
–
Mount and tighten screw
3
.
Guideline
Screw, bottom shock
absorber M12 80 Nm
(59 lbf ft) Loctite ® 2701
Info
The heim joint for the shock absorber at the swing arm is Teflon coated.
It must not be greased with grease or with other lubricants. Lubricants
dissolve the Teflon coating, thereby drastically reducing the service life.
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 44)