Hurricane ISI-321TTA, User Manual

Page: 23 / 36

23
19. Disassemble dasher assembly first from dasher bearing
and then from mixing shaft, then clean the assembly.
20. Clean the piston assembly hole of the dasher cover
with a brush and soft cloth.
21. After cleaning off all parts, dry them and reassemble them in the reverse order.
(Apply food grade grease on the shaft as shown below.)
18. Take out the piston of the dasher cover and clean
the edge of the piston with a soft towel.
PACKING jAVARA(Boot seal)
SHAFT
FOOD GRADE GREASE
GREASE
DASHER LUG POM
DASHER ASSY
DASHER LUG POM
(Scraper blade)
MIXING
SHAFT
BEARING
DASHER