Hurricane ISI-321TTA, User Manual

Page: 19 / 36

19
Carburetor control
CARBURETOR TUBE
CARBURETOR TUBE BODY
A small hole can improve the overrun, but it may depend on the amount of
ingredients in the mixing tank. The fewer ingredient is in the mixing tank, the higher
the overrun becomes.
The more the ingredient is, the lower the overrun becomes.
The carburetor is made up of two parts.
The part that is inserted into the hole of the mixing tank is called the
body and a tube is inserted into this. The tube has a hole at the top
and at the bottom. It can’t be inserted in the reverse direction.
The figure shows the carburetor with a blocked hole.
If you align the protrusion of the upper area of the carburetor body with
the area having no hole in the upper area of the tube, then the hole in
the lower area of the carburetor body will be blocked.
Condition of use: Initial soft ice cream making
This figure shows the carburetor aligned with a large hole.
Align the protrusion of the upper area of the carburetor body with the
large hole in the upper area of the tube. Decrease the overrun and
increase the amount of ingredients injection in this way when you
need continuous vending of the product.
Condition of use: When the “Auto” mode is executed
This figure shows the carburetor aligned with a small hole.
Align the protrusion of the upper area of the carburetor body with the
small hole in the upper area of the tube. Then, it will be aligned with
the small hole in the lower area of the carburetor body. Increase
the overrun and decrease the amount of ingredients injection in this
way when you expect a small amount of sales.
Condition of use: When the “Auto” mode is executed
This figure shows the carburetor aligned with a medium hole.
Align the protrusion of the upper area of the carburetor body with the
medium hole in the upper area of the tube. Then, it will be aligned with
the medium hole in the lower area of the carburetor body. It will make
the overrun and the amount of ingredients injection adequate for sales.
Condition of use: When the “Auto” mode is executed
For your
information