background image

6

ON

OFF

Warning

F

OF

Clean the product and turn off
the circuit breaker if the
product is not to be used for
an extended period of time.

It may cause electric
shock or fire.

Do not pull the power cord.

Failure to do so may cause
electric shock or fire.

Do not turn the power ON/
OFF with the circuit breaker
continuously.

It can cause electrical
shocks or fire.

Do not alter the power cord 
or modify it to connect 
to an unauthorized power source.

Failure to do so may cause
electric shock or fire.

Do not touch any moving part 
inside the product.

You may get injured.

Do not touch the circuit
breaker with wet hands.

Failure to do so may cause
electric shock or fire.

If the power cable is
damaged, then do not
replace it on your own.
Call the service center for
cable replacement.

It can cause electrical 
shocks or fires.

Do not put a candle or a lit
cigarette on the product.

Otherwise, there is danger 
of fire.

Do not connect many 
electrical products to the
circuit breaker.
Use it individually.

It can cause fires.

ON

OFF

If water got inside the power
components, immediately
unplug the cord and completely 
dry the product before using it.

Failure to do so may cause 
electric shock or fire.

If the circuit breaker is set to
「OFF」automatically,
do not turn it 「ON」by force.

Turning the circuit breaker「ON」 by 
force while the product is out of order 
may cause fire or electric shock.
Please contact the customer service 
center.

Do not put anything on 
the power cable.
Make sure that the power 
cable is not twisted or knotted.

Fire or electric shock
may occur.

Oh! NO

OFF

ON

OFF

Summary of Contents for ISI-321TTA





































Reviews: