HURAKAN IP10F, Operation And Maintenance Manual

Page: 16 / 84

6
GENERAL
INFORMATION
1
Overall dimensions
mm A B C mm A B C
IP10F
IP20F
IP30F
IP40F
IP60F
IP80F 500
570
800
800
1240
1240
470
570
670
670
980
980
740
1040
1240
1240
1780
1780
IP10F
IP20F
IP30F
IP40F
IP60F
IP80F 480
560
650
685
930
950
400
550
580
620
800
840
650
900
1050
1050
1500
1500
Safety devices
Microswitch: it will stop the machine
when the pan lid is opened. When the
lid is closed back, restart the machine
by pressing button
I
Remote control switch:
after an
unscheduled power cut, it requests a
specific machine restart control
Microswitch: it will stop the machine
when the pan is removed from its
location. After the pan has been put
back in place, restart the machine by
pressing button
I
Safety information
•
It is of the greatest importance to carefully read this manual before carrying out installation and use
operations. Consistent compliance with the instructions contained in this manual will guarantee personal
and machine safety.
•
Do not tamper with the safety devices for any reason.
•
We recommend that industrial safety regulations issued nationally by the appointed organisms be strictly
respected.
•
The manufacturer declines all responsability for injures to persons or damages to property, resulting from
failure to comply with these safety rules.
•
Correct machine setting, lighting and workshop cleanness are pre-conditions for personal safety.
•
Do not expose the machine to atmospheric agents.
•
The machine connection and start-up should only be executed by skilled engineers.
•
Check that the plant mains ratings correspond to the specifications printed on the machine data plate.
•
Make sure that the machine is connected to a grounding system.
•
The work area around the machine should always be kept clean and dry.
•
Wear the work attire prescribed by the industrial accident-prevention regulations.
•
This machine should always be used for its recommended uses ; any other use is deemed improper and
therefore dangerous.
•
Check the suitability and weight of the products to work ; do not overload the machine to exceed its
capacity.
Translation of the original instructions