12
3.
BASIC FUNCTIONALITY
3.2.
General hardware information
HUR equipment exercise resistance can be adjusted steplessly thanks to the pneumatic
resistance mechanism. The exercise resistance is selected by pressing the plus (+) or
minus (-) buttons. Plus (+) increases the resistance by increasing the pressure inside the
device, minus (-) reduces the resistance lowering the pressure. The pressure gauge on
the device indicates the resistance level.
Easy Access equipment comes with standard-sized mushroom buttons, making it easier
to adjust the resistance, for example for persons who have problems with finger
coordination. With the mushroom buttons the exercise resistance will be adjusted in the
same way as with standard buttons. Plus (+) increases the resistance and minus (-)
reduces the resistance by lowering the pressure.
NOTE!
Slight changes in the gauge reading during exercise is normal The Natural
Transmission ™ mechanism evens the resistance curve regardless of slight pressure
changes.
NOTE! When switching direction of movement, a hissing sound may occur, which is
normal. The sound is caused by the emptying of pressure.
WARNING!
Do not press the plus (+) and minus (-) buttons down simultaneously.
Simultaneous pressing of the buttons lets the pressure directly through the device,
which causes an unnecessary load on the pressure network, and can reduce the
equipment’s life cycle.
Some of the HUR devices are dual functioning, i.e. one device can be used to exercise
opposing muscle groups. The dual function selector switch is used to select which one of
the movement directions is to be used. Turn the selector switch clockwise or counter-
clockwise to change the exercise. Easy Access equipment has a joystick-like selector
switch to change the direction of movement by turning it up or down.
3.2.1.
Back support adjustment
Some HUR equipment has the option of manual adjustment of the back support in order
to enable a suitable exercise stance for users regardless of size. Lift the handles behind
the back support upwards and move the back support forward or backward to the
desired distance. Do not lean against the back support at the same time as you adjust it.
WARNING! Be careful not to jam your fingers in the adjustable back support
mechanism. To avoid injury, only grab the red-ended adjustment handles and the
padded part of the back support during adjusting.
3.2.2.
Seat height adjustment
The seat height of a device can be steplessly adjusted in order to enable a suitable
exercise stance for users regardless of size. Grasp the front sections of the side edges of
the seat with both hands and lift the seat to the desired height. To lower the seat, grab
the rear side edges of the seat, tilt the front up slightly and lower the seat to the desired
height. The HUR equipment seat lock mechanism allows the seat to lock at the desired
height without any additional locks, when it is at the desired height just release your
grip.