HunterLab ColorFlex EZ, User Manual

Page: 32 / 68

ColorFlex EZ User’s Manual Version 2. 2
32
In this submenu, the following parameters can be set:
•
Screen angle
Rotate the text on the ColorFlex EZ screen so that it may be easily read from either
side of the instrument. 0° keeps the text in its normal position and 180° flips the text
upside down. Please note that the functions of the buttons also rotate when the
screen text rotates (i.e., what was previously the up arrow will become the down
arrow if the text is flipped upside down). Each press of the
RIGHT arrow button
increases the displayed value 180°.
•
Backlight
Press the RIGHT arrow button to increase the brightness of the LCD’s backlight or
the LEFT arrow button to decrease the brightness. Values between 0 and 100 may
be selected in increments of 5.
Figure 45. Backlight
•
Contrast
Press the RIGHT arrow button to increase the display contrast or the LEFT arrow
button to decrease the contrast. Values between 0 and 100 may be selected in
increments of 5.
Figure 46. Contrast
•
Display Dim
Press the RIGHT arrow button to increase the time that must elapse (in seconds)
after the last button press before the LCD backlight automatically dims. Press the
LEFT arrow button to decrease that time. Values between 10 and 50 seconds may be
selected in increments of 10. When the backlight dims, the display may still be seen,
and the press of any button on the button pad causes the backlight to turn back on.