6
JIN04MKIIC_V1 10/01/17
STOVE DIMENSIONS
Diagram 1: Stove Dimensions
INSTALLING THE APPLIANCE
Pre-installation notes
1. Check the stove data plate to establish the gas type required. The data plate can be found on
a chain at the top left rear corner of the stove.
Before installation check that the local distribution conditions, nature of the gas and
pressure, and adjustment of the application are compatible.
2.
A GAS SAFE REGISTERED INSTALLER
or equally recognised competent person must fit the
appliance. That person is legally responsible for the safe installation of the appliance with
due regard to all relevant local and national building regulations.
3. All outer surfaces of the stove excepting the gas control knobs are defined as working
surfaces.
4. Installation site
Any installation area previously used for a solid fuel fire or stove would probably be deemed
suitable for the appliance.
5.
The stove must not be installed onto a combustible wall. Any combustible materials must
be removed from behind the appliance.
6. The appliance must be sited on a non-combustible hearth of minimum 12mm thickness.
7. The hearth should be edged or raised to prevent combustible floor finishes (e.g. Carpet)
from being laid too close to the appliance.
