12
JIN04MKIIC_V1 10/01/17
1.
The first log to be placed Log A. This is
placed around the left-hand front flame port hole in
the matrix. The log should sit comfortably in place on
the matrix as shown in photo 6.
Photo 6: Installing Log A.
3. The second log to be placed is Log B. The single end
is positioned to the right of the second front flame
port hole in the matrix, in the slot provided. The right-
hand fork at the opposite end of the log is then
located in the cut-out on the top edge of the back of
the base ceramic. The left-hand fork should then rest
on the edge of the matrix and the side of the stove.
As shown in photo 7.
Photo 7: Installing Log B.
4. Log C sits in a groove to the right of Log B
behind the third flame port hole in the
matrix. The top of the log sits in the cut-out
that is located on the top edge of the back
of the base ceramic, as shown in photo 8.
Photo 8: Log C
Log D
1
should be positioned behind the furthermost
right-hand flame port hole, resting against the back
upright of the base ceramic, making sure that it is
not directly above the rear flame port hole.
Log D
2
sits on the short arm of Log B, with the top of
it sitting in the cut-out on the rear upright at the
back of the base ceramic (photo 9).
Photo 9: Logs D
1
& D
2
.
