INSTALLATION
10
Install the Drapery
The drapery are rolled so the end that is
“out” is the stationary or stack side end. Position
the roll under the installed headrail so it unrolls
toward the window. Drapery will be marked LEFT
or RIGHT. With a split stack design, you will have
LEFT and RIGHT drapery.
■
Install the first grommet (marked with a hang tag) onto the anchor carrier.
➤
The anchor carrier is next to the end cap with the screw, to hold this
side of the drapery stationary.
➤
Each carrier has a hinged and a post side to it.
Place the grommet on the post.
IMPORTANT:
For the first and last grommets,
insert the post between the fabric folds. Then
place the grommet on the post.
➤
Bend the hinged side down, insert it through
the grommet, and snap it into the post, to
secure the grommet to the carrier.
■
Attach the next grommet from the drapery
to the next carrier in the FRONT track of
the headrail.
■
Continue attaching all the grommets on the
drapery to the carriers, alternating between
the FRONT and the BACK track.
■
Split Stack.
Place the last two carriers in the same track. The left drapery will be in the
FRONT track and the right drapery in the BACK track.
Window
Unroll
“Out”
End
First
Grommet
Post
Hinge
First
Grommet
For the first and last
grommet, insert the
post between the
fabric folds.
Post
Carrier
in Front
Track
Carrier in
Back Track
Grommet
Headrail
Last two carriers
in the FRONT track.
Alternating
Carriers
Alternating
Carriers
Last two carriers
in the BACK track.
