background image

Installation instructions

System drawer 60-144

J620.113-0

12.8.09  ITH

1

 

These installation instructions apply to the model: 

620

 

Identification plate

A

Remove the drawer. The identification plate is located on the inside of the appliance.

1. Fix a bracket set 60 

W

 (not included in the scope of delivery) for an 

appliance located above or below.

2. Carefully slide appliance into the niche until it is flush with the front 

of the cabinet.

3. Open the drawer and fix in place from the front, using the 4 supplied 

screws 

S

.

The appliance should be installed by qualified personnel only. Each step must be carried out and checked in full in the order
specified.

Validity

General notes

If fitting in flammable material, the guidelines and standards for low voltage installations and for the fire protection must be
strictly observed.

Installation

The drawer must be secured by 4 screws to prevent tipping.

S

W

Reviews: