HunterDouglas EverWood, Operating Systems

Page: 18 / 36

INSTALLATION
16
■
Install the battery wand cover with the slot aligned to the socket in the battery wand.
■
Plug the power cable from the blind into the
extension cable.
■
Plug the other end of the extension cable
into the socket in the battery wand.
■
Secure the power supply cable using wire
retainers (not provided). If hiding the cable
behind the blind, make sure it does not impede
the operation of the blind.
Proceed to “Testing the Blind” on page 20.
Rechargeable Battery Wand
Install the Rechargeable Battery Mount
■
Decide where you want to install the rechargeable battery mount. This may be mounted
behind the headrail, or in any desired location near the window covering. A satellite
battery mount may be installed in any orientation.
➤
Make sure the provided cable is long enough to connect the satellite battery mount
and the blind.
CAUTION:
The rear of the battery mount must be flush against a flat mounting surface.
Do not install the mount on curved molding.
Battery Wand Cover
Slot
Socket
Battery Wand Cover
Extension
Cable
Power Cable
from Blind
2"
Power
Socket
End
Allow 2" at power socket end for the extension cable jack.
Minimum flat mounting area = 15" x 1"
13"
15" Minimum Mounting Length
1"