INSTALLATION
13
Attach the Corner Clips (If Required)
If the valance came with returns, connect the returns
to the valance using the corner clips provided.
The notches on the back of the valance and valance
returns fit into the grooves of the corner clips.
■
Slide one end of each clip onto the back of the
valance until the center of the clip aligns with the
edge of the miter cut at each end.
■
Slide a return onto each corner clip until its miter
is flush against the miter on the valance.
NOTE:
Valance design varies by product.
Attach the Valance Splice (If Required)
For valances that are spliced, join the two mitered valance
pieces together by sliding the valance splice clip over the
back of the valance where the two halves meet.
Mitered Egdes Meet
Valance
Valance
Return
(Cross-
Section)
Corner
Clip
Notch
Notch
Miters
Valance
Splice Clip
Summary of Contents for EverWood
Page 34: ...CHILD SAFETY 32 ...
