26
PROGRAMMING THE CONTROLLER (continued) ..............................................................
SET PROGRAM
START TIMES
PM
START TIME
Eliminating A Program Start Time
With the dial set to the
SET
PROGRAM START TIMES
position, push the
and
buttons until you reach 12:00
AM
(Midnight). From this position
push the
button once to reach
the
OFF
position.
NOTE:
If a program has all eight start times
turned off, then that program is off (all other
program details are retained). Because there are
no start times, there will be no watering with that
program. This is a convenient way to stop watering
on one program only without turning the dial to the
off position.
SET STATION
RUN TIMES
START TIME
START TIME
Setting Station Run Times (Length of Watering for Each Area)
1. Turn the dial to the
SET
STATION RUN TIMES
position.
2. The display will show the last
program selected (
A
,
B
,
C
, or
D
). You can switch to another
program by pressing
the
button.
3. Use the and buttons to
change the station run time on
the display.
4. Press the button to advance
to the next station.
5. Repeat steps 4 and 5 for each
station.
6. You may set station run times
from 1 minute to 2 hours. If the
station is assigned program
D
,
the run time can be set for up to 12 hours.
7. You can move between programs while staying on the same station.
However, it is recommended that one program is completed before
going on to the next program. Jumping between programs can be
confusing and may result in program errors.
